Product Overview

The Krups BeerTender B95 is a highly sought-after beer dispensing system that combines convenience, quality, and precise performance. It is designed to bring the pub experience into your home, delivering chilled draft beer from your kegs at the perfect temperature. For enthusiasts and homebrewers, understanding the dimensions and capacity of the BeerTender B95 is essential to ensuring proper installation, usage, and optimal performance.

Dimensions of the Krups BeerTender B95

Understanding the dimensions of the Krups BeerTender B95 is crucial for determining whether it fits in your desired space. The unit is compact and sleek, allowing it to fit in most kitchen areas or home bars without taking up too much room.

• Height: 11.7 inches (29.7 cm)
• Width: 14.6 inches (37.1 cm)
• Depth: 17.3 inches (44 cm)
• Weight: 9.3 pounds (4.2 kg)

The BeerTender B95’s design is user-friendly, with ergonomic features and a space-efficient build. It is small enough to sit comfortably on your countertop but large enough to accommodate the required beer kegs.

Capacity and Beer Storage

The Krups BeerTender B95 is compatible with a variety of beer kegs, specifically those that are compatible with the BeerTender system, which generally includes 5-liter kegs. The system is designed to maintain the beer at a consistent temperature, ensuring freshness and perfect pours every time.

• Keg Size: 5 liters (1.32 gallons)
• Capacity: 5 liters of beer
• Beer Pouring Time: Up to 20-25 servings per keg (approximately 1 pint per serving)

The BeerTender B95 is an ideal choice for smaller gatherings or casual home use, where you don’t need a large volume of beer at once. With the 5-liter keg, you can serve multiple guests or enjoy several rounds without needing to replace the keg immediately.

Installation and Set-Up

Setting up the Krups BeerTender B95 is straightforward, but it is essential to follow the proper steps to ensure everything works correctly. The BeerTender B95 is easy to install and requires minimal assembly.

Tools Required:

• Phillips screwdriver
• Flathead screwdriver
• Clean towel or cloth

Installation Steps:

1. Unbox the BeerTender B95: Carefully remove the unit from its packaging, ensuring all components are present.
2. Position the BeerTender: Place the BeerTender on a stable, level surface such as a kitchen countertop or home bar.
3. Attach the Beer Keg Holder: Use the Phillips screwdriver to attach the keg holder to the BeerTender base, securing it firmly in place.
4. Install the Beer Keg: Open the BeerTender lid and place the compatible 5-liter keg inside. Ensure the keg is aligned correctly and fits snugly.
5. Connect the Beer Tap: Attach the beer tap to the keg. Ensure it is securely connected to prevent leaks.
6. Plug in the Unit: Connect the BeerTender to a power outlet and press the power button to turn it on.
7. Set the Temperature: Adjust the temperature to your preferred setting, typically between 37°F (3°C) and 39°F (4°C) for optimal beer freshness.
8. Start Pouring: Once the keg is properly installed, the BeerTender will begin cooling the beer. After a short wait, you’re ready to pour your first glass.

Maintenance and Cleaning

Maintaining the Krups BeerTender B95 is essential for preserving the quality of your beer and extending the lifespan of the unit. Regular cleaning and maintenance are required to prevent bacterial buildup, mold, and other contaminants.

Cleaning Steps:

1. Turn off the BeerTender: Always unplug the unit before cleaning to avoid electrical accidents.
2. Remove the Keg: Take the beer keg out of the unit, ensuring there is no excess beer spilling.
3. Clean the Tap: Use warm water and mild soap to clean the beer tap. Avoid using abrasive materials that could damage the tap.
4. Wipe the Surface: Use a clean, damp cloth to wipe down the BeerTender’s exterior. This will prevent dust and grime from accumulating.
5. Empty the Beer Line: Detach the beer line from the keg and run warm water through it to flush out any residual beer.
6. Dry Components: Allow all components to dry thoroughly before reassembling the BeerTender.
7. Reinstall the Keg: Once everything is dry, reinstall the keg and beer line, ensuring the tap is clean and functioning.

By performing these cleaning steps after every use, you can ensure your BeerTender remains in excellent condition, providing you with cold, fresh beer every time.

Troubleshooting Common Issues

While the Krups BeerTender B95 is designed for reliability, you may encounter some common issues during its use. Here are the steps to troubleshoot and resolve these problems:

1. Beer Not Pouring Properly

• Possible Cause: The beer tap or beer line may be clogged.
• Solution: Clean the beer line and tap thoroughly using warm water to flush out any blockages.

2. Beer Is Too Warm

• Possible Cause: The temperature setting may be too high or the cooling system may be malfunctioning.
• Solution: Lower the temperature setting to the recommended range (37°F to 39°F) and check the power supply to ensure the cooling system is functioning correctly.

3. Beer Foam Issues

• Possible Cause: The beer pressure may be too high, or the keg may not be properly seated.
• Solution: Re-seat the keg and ensure it is aligned properly. Check the beer pressure and adjust it if necessary.

4. Beer Keg Leaking

• Possible Cause: The keg is not properly connected to the beer tap.
• Solution: Disconnect and reconnect the keg and beer tap, ensuring a secure fit to prevent leaks.

Customization and Optimization

The Krups BeerTender B95 allows for a few customization options to optimize your beer experience. While the unit is designed for simple operation, small adjustments can improve its performance.

Temperature Control:

Adjust the temperature settings to suit your preference. The BeerTender B95 typically keeps the beer between 37°F (3°C) and 39°F (4°C), but you can experiment with slightly higher or lower settings based on your beer style.

Beer Keg Selection:

For optimal results, use kegs that are designed for the BeerTender B95 system. Although the unit works best with 5-liter kegs, you may also explore various craft beer options to customize your beer experience.

Comparison with Similar Products

When comparing the Krups BeerTender B95 to similar products, it’s important to look at key factors such as size, capacity, and ease of use. Here’s how it stands against its competitors:

Krups BeerTender B95 vs. PerfectDraft by Philips

• Beer Keg Size: The BeerTender B95 is compatible with 5-liter kegs, while PerfectDraft by Philips uses 6-liter kegs.
• Cooling System: Both systems offer similar cooling capabilities, keeping beer at a consistent temperature for freshness. However, the BeerTender B95’s slightly smaller design may appeal to those with limited space.
• Ease of Use: Both models are easy to set up and maintain, with clear instructions and simple controls.

Krups BeerTender B95 vs. SUB by Heineken

• Beer Keg Compatibility: The SUB by Heineken uses specially designed kegs, which limits the variety of beers you can enjoy. In contrast, the BeerTender B95 allows for more flexibility in keg selection.
• Build Quality: Both units are durable and made with high-quality materials, but the BeerTender B95 is more compact and portable.

Compatibility with Related Products

The Krups BeerTender B95 works seamlessly with other beer-related products, especially beer dispensers and kegerators. It is compatible with most 5-liter kegs, but it’s important to verify that your keg fits the system before purchase.

• Keg Systems: The BeerTender B95 is designed to work with kegs that feature a tap system compatible with the unit. Always check the keg’s compatibility before purchasing.
• Beer Dispensers: The B95 can be connected to beer dispensers for an integrated experience, allowing for greater ease in pouring and temperature control.

By understanding the dimensions, capacity, installation process, and troubleshooting tips for the Krups BeerTender B95, you can ensure an optimal beer dispensing experience every time.

The Krups BeerTender B95 is a popular beer dispenser that brings the convenience of draft beer right to your home. However, one of the main concerns for potential buyers, especially those living in apartments or shared living spaces, is whether this model is quiet enough to use without disturbing neighbors or other residents. In this article, we’ll explore the noise level of the Krups BeerTender B95, how to install and maintain it, and how to ensure it works quietly and efficiently in apartment settings.

Understanding the Krups BeerTender B95 and Its Design

The Krups BeerTender B95 is designed to offer a draft beer experience in a home setting, utilizing a compact and user-friendly system. It’s compatible with Heineken mini kegs, making it easy to store and dispense your favorite beers. The dispenser features a cooling system and tap handle to ensure that your beer stays at the optimal serving temperature, delivering a fresh and enjoyable experience every time.

One aspect that many users will appreciate is the compact design of the BeerTender B95, which makes it easy to store in smaller spaces like apartments. However, with its cooling system and motorized dispensing mechanism, it’s essential to consider whether the noise it generates is suitable for quiet, shared living environments.

Tools Required

Before setting up the Krups BeerTender B95, ensure you have the following tools and equipment:

• Krups BeerTender B95 unit
• Heineken mini keg (compatible with BeerTender B95)
• Water source for cleaning and maintenance
• Cleaning brushes (for the dispensing system)
• Soft cloths or paper towels for cleaning surfaces

Installation of the Krups BeerTender B95

Installing the Krups BeerTender B95 is straightforward and can be completed in a few simple steps. Below is a guide for setting up the unit:

1. Unbox the BeerTender B95: Carefully unpack the unit, ensuring you have all necessary components such as the dispenser, tap handle, and cooling system.
2. Set the unit on a flat surface: Choose a stable and level surface in your apartment to place the BeerTender B95, keeping it away from heat sources or direct sunlight.
3. Install the Heineken mini keg: Insert the mini keg into the BeerTender’s compartment. Ensure it is securely connected to the tap handle, following the manufacturer’s instructions for optimal dispensing.
4. Plug the unit in: Connect the BeerTender B95 to an electrical outlet. Check for any visible error lights or warnings on the display panel.
5. Turn on the unit: Power the BeerTender B95 on, and adjust the temperature settings if needed to ensure your beer stays at the ideal serving temperature.

Once installed, the Krups BeerTender B95 will be ready to dispense your beer. However, to ensure a quiet operation, make sure the unit is placed on a solid surface that can absorb vibrations, and avoid placing it on thin or hollow tables that may amplify sound.

Noise Levels and Quiet Operation in Apartments

The Krups BeerTender B95 does generate some noise when it operates, primarily due to the cooling system and motorized dispensing mechanism. The noise produced is typically in the range of 40-50 decibels (dB), which is roughly the noise level of a quiet conversation or a library. In most apartment settings, this noise level is generally considered acceptable, especially if the unit is placed on a flat, stable surface.

However, if the BeerTender is placed near a wall or in a corner, the sound may be more noticeable. To minimize noise disruptions, consider the following tips:

• Place the unit on a vibration-absorbing mat: A silicone or foam mat can help dampen vibrations and reduce noise levels.
• Choose the right location: Avoid placing the BeerTender near thin walls or adjacent to a shared space where the sound can carry.
• Ensure proper ventilation: The BeerTender needs some airflow to maintain the cooling system’s efficiency. Placing the unit in a well-ventilated area will prevent the cooling fan from working harder, which could lead to higher noise levels.

Troubleshooting Common Setup Issues

If you’re encountering excessive noise or other issues with the Krups BeerTender B95, follow these troubleshooting steps to ensure the unit operates quietly and efficiently:

1. Unit not cooling properly: If the BeerTender isn’t cooling your beer to the desired temperature, ensure that the mini keg is properly installed and that the cooling system is functioning. Check for any error codes or malfunctions on the display panel.
2. Loud noise or buzzing: Excessive noise can be caused by improper placement of the unit. Make sure it’s on a stable surface. If the noise persists, inspect the cooling fan for any obstructions and clean the unit regularly to prevent dust buildup.
3. Uneven beer dispensing: If the beer isn’t dispensed smoothly, the tap or keg connection may be loose. Disconnect and reconnect the keg and tap to ensure a secure fit.

Customization and Optimization for Quiet Performance

To optimize the performance of the Krups BeerTender B95 for quieter operation, consider the following customization options:

• Adjust the temperature settings: Lowering the cooling temperature can reduce the workload on the BeerTender’s motor and cooling fan, which may result in quieter performance.
• Regular maintenance: Clean the tap handle and internal dispensing system regularly to prevent buildup that could affect the flow of beer and increase noise.
• Use a mat or isolation pads: Using a mat designed to reduce vibrations or placing the BeerTender on a thick, soft surface can absorb sound and minimize any disturbances.

By following these tips, you can customize the BeerTender B95 to operate quietly, ensuring it is suitable for use in your apartment without causing noise disruptions.

Comparison with Similar Products

While the Krups BeerTender B95 is a solid option for home beer dispensing, it’s helpful to compare it with other similar products on the market to make an informed decision about which one is best suited for your apartment.

1. Heineken Draught Keg System: Like the BeerTender, this system is designed for Heineken mini kegs but tends to be slightly quieter due to its more compact cooling system. However, it doesn’t offer the same sleek design or features as the Krups model.
2. AeroPress Coffee Maker (with beer compatibility): While not directly comparable in terms of beer dispensing, this option offers a quieter operation and might appeal to those seeking an alternative way to enjoy cold beverages at home.

Ultimately, the Krups BeerTender B95 strikes a good balance between convenience and quiet operation. For apartment dwellers looking for an affordable, functional beer dispenser, it remains one of the best options available.

Compatibility with Other Related Beer Products

The Krups BeerTender B95 is primarily designed to work with Heineken mini kegs. While it is compatible with other similar-sized mini kegs, it is important to verify compatibility before using any non-Heineken kegs. Additionally, the BeerTender B95 works well with other beer accessories, such as beer glasses and foam reducers, but should not be connected to external keg systems or large-scale beer dispensers.

In terms of maintenance and cleaning, the BeerTender can be paired with a variety of cleaning solutions and brushes to ensure the unit remains in good working condition over time.

Conclusion

The Krups BeerTender B95 is generally quiet enough for use in apartments, especially when proper installation and maintenance procedures are followed. With its cooling system and beer dispensing features, it delivers a convenient and enjoyable beer experience, while remaining within acceptable noise levels for shared living spaces. By following the tips provided for placement, maintenance, and optimization, you can ensure that your BeerTender operates quietly, without disturbing your neighbors or housemates.

The Krups BeerTender B95 is a popular beer dispenser that provides a draft-style pouring experience at home. To ensure the best performance and taste from your beer, it is essential to clean and maintain your BeerTender regularly. In this guide, we will cover the detailed steps involved in cleaning and maintaining your Krups BeerTender B95, troubleshooting common issues, and optimizing its performance.

Tools Required

• Mild detergent (non-abrasive)
• Soft cloth or sponge
• Warm water
• Bottle brush or small brush
• Paper towels
• A sink or basin for soaking
• Bucket for drainage

Cleaning the Krups BeerTender B95: A Step‑by‑Step Guide

1. Prepare the BeerTender for Cleaning

Before starting any cleaning process, it’s essential to remove the keg and disconnect any power source.

• Disconnect the BeerTender from the electrical outlet.
• Remove the keg from the BeerTender unit, ensuring there’s no beer left in the system.
• Dispose of any remaining beer in the keg and clean the keg separately if required.

2. Disassemble the BeerTender B95

To ensure thorough cleaning, you need to disassemble the BeerTender. This involves taking out the components that come into direct contact with beer.

• Remove the drip tray from the BeerTender and set it aside.
• Detach the beer tower (where the beer flows out) from the dispenser unit.
• Remove the hose from the dispensing nozzle to clean it thoroughly.

3. Cleaning the Beer Tower and Nozzle

The beer tower and nozzle are critical components where beer residue often accumulates. Cleaning these parts regularly prevents the build-up of mold, bacteria, or stale beer taste.

• Soak the beer tower and nozzle in warm water with a mild detergent for 15–20 minutes.
• Use a bottle brush or small brush to scrub the inside of the beer tower and nozzle, ensuring all beer remnants are removed.
• Rinse with warm water until all detergent is gone.
• Dry the parts with a soft cloth.

4. Cleaning the Drip Tray

The drip tray collects excess beer and residue that drips from the dispensing nozzle. Regular cleaning of the drip tray is essential to maintain hygiene.

• Remove the drip tray from the BeerTender and wash it in warm, soapy water.
• Use a soft cloth or sponge to wipe off any stuck beer stains.
• Rinse it thoroughly and dry it with a soft towel or paper towels.

5. Cleaning the Beer Hose

The beer hose is a vital component that transfers the beer from the keg to the dispensing nozzle. It is crucial to clean it thoroughly to avoid any beer build-up or contamination.

• Detach the beer hose from the BeerTender.
• Use warm water and mild detergent to clean the hose.
• You can use a bottle brush to scrub inside the hose if necessary.
• After cleaning, rinse the hose thoroughly with clean water to remove any detergent residues.

6. Cleaning the BeerTender Base Unit

The base unit of the BeerTender can accumulate dust and beer spillage. Cleaning the base ensures that the unit continues to operate efficiently.

• Use a damp cloth to wipe down the exterior of the base unit.
• Avoid using abrasive cleaners, as they may damage the surface of the unit.
• Ensure that no water gets into the interior parts of the BeerTender.

7. Reassemble the BeerTender

After all the parts are thoroughly cleaned and dried, it’s time to reassemble the BeerTender.

• Attach the beer hose to the dispenser nozzle.
• Reinstall the beer tower onto the unit.
• Place the drip tray back in its designated position.
• Ensure all components are securely in place before plugging the unit back in.

Troubleshooting Common Set-up Issues

Even with regular cleaning, certain issues can arise with the Krups BeerTender B95. Below are some common problems and their solutions:

1. Beer Not Dispensing Properly

If the beer is not dispensing correctly, there may be a blockage in the beer hose or dispensing nozzle.

• Ensure that the beer hose is clean and free of blockages.
• Check the nozzle for any beer residue or build-up.
• Clean the beer tower and nozzle thoroughly, as they could be clogged with beer remnants.

2. Beer Temperature Issues

If the beer is not staying cool or dispensing at the right temperature, there could be an issue with the cooling mechanism or the placement of the keg.

• Ensure the keg is properly inserted and the BeerTender is plugged in and powered on.
• Check the cooling system by confirming the BeerTender is placed in a well-ventilated area, away from heat sources.

3. Leaks or Dripping Beer

Leaks can occur if the beer hose or dispensing nozzle is not connected correctly.

• Inspect the hose connections to ensure they are secure.
• If you notice any damage to the hose or nozzle, replace them immediately.
• Regularly clean the hose and nozzle to prevent any beer build-up that could lead to leaks.

Customization and Optimization for Better Performance

1. Optimal Beer Placement

To ensure the best performance from your BeerTender B95, always ensure that the keg is properly stored and cooled before inserting it into the unit. The temperature of the keg should be between 35°F and 45°F for optimal pouring.

2. Adjusting the Beer Flow Rate

While the BeerTender doesn’t offer advanced flow control features, you can control the flow rate by adjusting the dispensing nozzle. If the flow is too fast, reduce the angle at which you hold the glass under the nozzle.

3. Cleaning Frequency

For optimal performance, clean the BeerTender B95 at least once a week, especially if you use it frequently. If you notice any odd flavors or excessive foam, clean it more often.

Comparison with Similar Products

The Krups BeerTender B95 is often compared to similar beer dispensers like the Heineken BeerTender and the DrinkPod. While these models share some similarities, they differ in their specific features:

• Heineken BeerTender: The Heineken BeerTender is a compact and easy-to-use dispenser, but it has a smaller cooling capacity compared to the Krups BeerTender B95. The Krups B95 offers more flexibility with temperature settings and provides a longer shelf life for beer.
• DrinkPod Beer Dispenser: The DrinkPod has a larger footprint and is designed to support more volume, making it suitable for larger parties. However, the Krups BeerTender B95 is a more compact option, ideal for casual beer drinkers with limited space.

Which One Should You Choose?

• For casual use and a smaller unit, the Krups BeerTender B95 is a great choice.
• For larger gatherings or frequent use, the DrinkPod may be a better option due to its capacity.

Understanding Compatibility with Other Related Beer Products

The Krups BeerTender B95 is specifically designed to work with Heineken mini kegs, but it may also be compatible with other brands of kegs that fit the same size and valve system. Before purchasing a different keg brand, ensure it fits the BeerTender’s specifications to avoid any issues with operation.

Some users also opt to use the BeerTender with a beer line cleaning kit to further enhance the cleanliness of their system. Ensure that any accessories or modifications you use are compatible with the Krups BeerTender B95 to maintain optimal performance.

The Krups BeerTender B95 is a popular beer dispenser that brings bar-quality draft beer experience to your home. One of the essential components for its operation is the CO₂ cartridge, which ensures that your beer is dispensed at the right pressure, maintaining both carbonation and freshness. Understanding how to correctly use and adjust CO₂ cartridges with the BeerTender B95, especially with regard to PSI (pounds per square inch) settings, is crucial for achieving optimal performance. This guide will walk you through everything you need to know about CO₂ cartridges and PSI adjustments, including installation, troubleshooting, customization, and compatibility with other beer accessories.

Tools Required

• Krups BeerTender B95
• CO₂ cartridge (compatible with BeerTender B95)
• PSI gauge
• Small screwdriver (for adjustment)
• Replacement CO₂ cartridges
• Gloves (optional for handling CO₂ cartridges)

Installation of CO₂ Cartridges in the Krups BeerTender B95

Installing a CO₂ cartridge in your Krups BeerTender B95 is a straightforward process, but it requires attention to detail to ensure the system functions properly.

Steps for Installing CO₂ Cartridge:

1. Prepare the BeerTender: Turn off the BeerTender B95 and unplug it to ensure safety.
2. Access the CO₂ compartment: Open the compartment located at the top of the BeerTender. This is where the CO₂ cartridge will be inserted.
3. Insert the CO₂ Cartridge: Take the CO₂ cartridge and gently screw it into the designated slot inside the compartment. Be sure to align it properly to avoid cross-threading.
4. Tighten the Cartridge: Use a small screwdriver, if needed, to tighten the CO₂ cartridge. Do not over-tighten as this could cause damage to the threads.
5. Check for Leaks: Once the CO₂ cartridge is installed, ensure there are no visible leaks. If you notice any gas escaping, unscrew and re-tighten the cartridge.

After installation, it is important to set the correct PSI to ensure proper beer flow.

Understanding and Adjusting PSI for Optimal Performance

PSI (pounds per square inch) determines the pressure at which the beer is dispensed. Setting the correct PSI is vital to prevent over-carbonation or under-carbonation, which can affect the taste and texture of your beer.

Recommended PSI Range:

• Standard PSI for BeerTender B95: The ideal PSI range for the Krups BeerTender B95 is typically between 10-12 PSI. This range ensures proper carbonation and prevents foamy, overly gassy beer.

How to Adjust PSI:

1. Locate the PSI Control: Depending on the model of your BeerTender B95, the PSI control may be either integrated within the BeerTender or attached to the CO₂ compartment.
2. Adjust the Pressure: Use the adjustment dial or knob to set the desired PSI. Start by setting it to the recommended 10 PSI and adjust based on your beer style or personal preference.
3. Test Dispense: After making the adjustment, dispense a small amount of beer to check if the pressure feels right. The beer should flow steadily without excessive foam.
4. Fine-Tune PSI: If your beer is coming out too foamy, lower the PSI slightly. Conversely, if the beer is coming out too slowly, raise the PSI to increase the pressure.

Troubleshooting Common CO₂ Cartridge Issues

While using the CO₂ cartridge with the Krups BeerTender B95 is relatively simple, there are common issues that can arise. Understanding how to troubleshoot these issues will help you maintain optimal performance.

Common Issues and Solutions:

1. No Beer Flow: If there is no beer flow, check if the CO₂ cartridge is properly installed. If it is, ensure that the cartridge is not empty or faulty. Replace the cartridge if needed.
2. Excessive Foam: Excessive foam is typically a sign of high PSI. Lower the PSI in small increments and test the flow after each adjustment.
3. CO₂ Leaks: If you hear a hissing sound or notice a drop in beer quality, the CO₂ cartridge may not be installed correctly. Ensure it is tightened properly, and check for any visible damage to the cartridge or the BeerTender’s CO₂ compartment.
4. Beer Tastes Flat: If the beer tastes flat, your PSI may be too low, causing insufficient carbonation. Increase the PSI to within the recommended range.

Customization and Optimization for Better Performance

To make the most of your BeerTender B95, it’s essential to customize your CO₂ cartridge settings based on the type of beer you’re serving. Different beers require different carbonation levels for optimal taste.

Beer Style Considerations:

• Lager: Lagers generally require a PSI of around 10-11 to maintain a crisp, smooth taste.
• Ale: Ales can handle slightly higher PSI, around 11-12, to enhance carbonation and mouthfeel.
• Stout: Stouts and darker beers typically benefit from a lower PSI (around 8-10), as they are less carbonated and have a smoother pour.

Tips for Enhanced Performance:

• Cold Storage: Ensure that your BeerTender B95 is stored in a cool area, as higher temperatures can cause CO₂ to dissipate faster, affecting the beer’s carbonation.
• Frequent Cartridge Changes: If you use the BeerTender B95 frequently, replace the CO₂ cartridge every few weeks to maintain consistent beer quality.
• Cartridge Quality: Always opt for high-quality, compatible CO₂ cartridges. Low-quality cartridges may leak or cause uneven carbonation.

Comparison with Similar Products

When selecting a CO₂ system for your beer dispenser, there are several alternatives to the BeerTender B95. Understanding the differences can help you choose the best option for your needs.

BeerTender B95 vs. Other Beer Dispensers:

• Kegco Kegerator: Unlike the BeerTender B95, the Kegco Kegerator uses a more robust CO₂ tank system, which is ideal for larger home brewing setups. However, it may require more maintenance and adjustment of PSI settings.
• PerfectDraft: Similar to the BeerTender B95, the PerfectDraft system uses CO₂ cartridges, but it may require more frequent cartridge replacements, as its system tends to use more CO₂ per beer pour.

In comparison, the Krups BeerTender B95 is an excellent choice for users who prefer convenience and ease of use in smaller, more compact setups.

Compatibility with Other Beer Products

When using the Krups BeerTender B95, it is important to ensure compatibility with other beer accessories, such as keg systems and beer dispensers. The BeerTender B95 is specifically designed to work with certain CO₂ cartridges, and its system may not be compatible with larger CO₂ tanks used by commercial kegerators.

Key Compatibility Points:

• CO₂ Cartridges: Only use cartridges that are specifically designed for the BeerTender B95 to avoid leaks and performance issues.
• Beer Kegs: The BeerTender B95 works best with mini-kegs, typically 5 liters in size. If you use a larger keg system, a different beer dispenser setup may be required.
• Beer Glassware: While not critical to the CO₂ system, using the right glassware (such as pint glasses or steins) ensures a better overall drinking experience when paired with your BeerTender B95.

The Krups BeerTender B95 is a popular compact kegerator designed for beer enthusiasts who want to enjoy draft beer at home. This 5-liter mini kegerator offers a convenient way to serve chilled beer directly from a keg, bringing the pub experience into your kitchen. In this guide, we’ll cover everything from installation and setup to maintenance and troubleshooting, ensuring that you can make the most of your BeerTender B95.

Installation of the Krups BeerTender B95

Setting up your BeerTender B95 is a straightforward process. Follow these steps for a quick and hassle-free installation:

Step 1: Unbox the BeerTender

Carefully remove the BeerTender B95 from its packaging. You should find the unit, power cord, and an instruction manual inside the box. Ensure you have all the parts before starting the installation.

Step 2: Place the BeerTender

Position the BeerTender on a stable, level surface, preferably near an electrical outlet. Make sure the unit is well-ventilated to ensure efficient cooling.

Step 3: Attach the Drip Tray

Locate the drip tray and attach it to the bottom of the BeerTender. This tray catches any drips from the tap and keeps the area clean.

Step 4: Insert the Beer Keg

Remove the protective film from the beer keg. Insert the keg into the BeerTender, ensuring it fits securely in the compartment. The Krups BeerTender B95 is designed to hold 5-liter kegs, specifically Heineken and similar mini-kegs. Align the keg’s tap connector with the BeerTender’s fitting, ensuring it’s fully locked in place.

Step 5: Connect the CO2 Cartridge

The BeerTender uses a CO2 cartridge to pressurize the keg and ensure proper pouring. Insert the CO2 cartridge into its designated compartment and tighten the lid to secure it. Make sure the cartridge is compatible with the BeerTender’s specifications.

Step 6: Power Up

Plug the BeerTender into a power outlet. Press the power button to turn on the unit, and set the temperature to your desired level using the adjustable control. Allow the BeerTender to chill the beer for at least a couple of hours before pouring your first drink.

Adjustment and Maintenance of the Krups BeerTender B95

To maintain optimal performance, regular adjustments and upkeep of the BeerTender B95 are necessary. Here’s how you can keep it in top condition:

Temperature Control

• The BeerTender B95 allows you to adjust the temperature to your preferred level, typically between 4°C and 12°C (39°F to 54°F). Ensure that you set it to the right temperature for the beer you are serving. Lighter beers typically require a cooler setting, while darker beers can be served at slightly higher temperatures.
• Avoid setting the temperature too low, as this could result in over-carbonation and a foamy pour.

Regular Cleaning

• Clean the BeerTender regularly to prevent any buildup of beer residue or bacteria. Use warm, soapy water and a soft cloth to wipe down the exterior and the drip tray.
• It’s essential to clean the beer tap after each use. Detach the tap and rinse it thoroughly with warm water to remove any leftover beer.
• Clean the keg compartment and CO2 cartridge area at least once a month to prevent contamination.

CO2 Cartridge Replacement

• Monitor the CO2 cartridge and replace it when it’s depleted. The BeerTender will not function correctly without a CO2 cartridge, and beer quality may degrade if it’s not replaced.
• Always use compatible CO2 cartridges designed for the BeerTender B95 to ensure proper functionality.

Troubleshooting Common Set-Up Issues

If you encounter problems during the setup or use of the BeerTender B95, here are some common troubleshooting tips:

Issue 1: Beer Not Dispensing

• Solution: Ensure the keg is properly connected to the BeerTender’s tap fitting. If the keg is not seated correctly, beer won’t flow. Also, check the CO2 cartridge to make sure it’s properly inserted and functional. If necessary, replace the CO2 cartridge with a new one.

Issue 2: Beer Too Foamy

• Solution: If your beer is pouring with excessive foam, it might be due to the temperature being too low. Raise the temperature slightly to reduce foam. Also, check the CO2 pressure; if it’s too high, lower it to reduce carbonation.

Issue 3: Beer Not Cold Enough

• Solution: Ensure the BeerTender is plugged in and properly powered. Verify that the temperature control is set correctly. If the unit is still not cooling, check the ventilation area to ensure it’s not obstructed and the unit can dissipate heat effectively.

Issue 4: Beer Doesn’t Fit Properly in the Keg Compartment

• Solution: Double-check that you are using compatible 5-liter mini-kegs like Heineken kegs. Other brands or incompatible sizes may not fit or connect properly with the BeerTender.

Customization and Optimization for Better Performance

To optimize the performance of the Krups BeerTender B95, consider the following tips for customization:

Choosing the Right Beer

• While the BeerTender B95 is primarily designed to work with Heineken mini-kegs, other compatible 5-liter mini-kegs can be used. Explore different beer brands that come in compatible mini-keg sizes to expand your beer options.
• Opt for kegs with fresh beer for the best taste. Avoid using beer that has been sitting in the keg for extended periods, as the flavor may degrade over time.

Adjusting the Carbonation

• If you prefer a beer with more carbonation, adjust the CO2 cartridge pressure slightly. A higher pressure will increase the carbonation, giving the beer more fizz.
• Conversely, for beers that should be less carbonated (such as stouts), reduce the CO2 pressure for a smoother pour.

Setting the Ideal Pour

• If you’re getting too much foam, adjust the tap handle’s flow speed. Pouring slowly at a slight angle can also help reduce excessive foam.
• For a smoother, more controlled pour, try pouring at a 45-degree angle and using a clean, dry glass.

Comparison with Similar Products

When considering the Krups BeerTender B95, it’s helpful to compare it with similar 5-liter kegerators on the market. Here’s how it stacks up:

Krups BeerTender B95 vs. Philips PerfectDraft HD3720/25

• Size and Portability: The BeerTender B95 is slightly smaller, making it a better choice for limited spaces or smaller gatherings. The Philips PerfectDraft HD3720/25 is bulkier and might not be as easily portable.
• Temperature Control: Both products offer adjustable temperature settings, but the Philips model tends to have a more advanced cooling system, which might be ideal for those who need precise control over beer temperature.
• Beer Compatibility: The BeerTender B95 is compatible with Heineken and other similar 5-liter kegs, while the Philips PerfectDraft supports a wider range of beers and has more keg size options.

Krups BeerTender B95 vs. Mini Keg Dispensers

• Ease of Use: The BeerTender B95 offers more straightforward setup and fewer maintenance requirements than many other mini-keg dispensers, making it a great option for beginners.
• Customization Options: The Krups model lacks some of the advanced customization features found in higher-end dispensers but is an excellent choice for those who want convenience and simplicity over technical tweaks.

Understanding Compatibility with Other Beer Products

The Krups BeerTender B95 is specifically designed to work with 5-liter mini-kegs, such as Heineken and similar kegs. It is important to note that the BeerTender B95 is not compatible with larger kegs (e.g., 15.5-gallon kegs). Additionally, it relies on CO2 cartridges for carbonation, so ensuring you use the correct cartridge size is crucial for maintaining proper keg pressure.

When pairing with other beer products, it’s important to check the compatibility of beer types. Beers with different carbonation levels or viscosities may pour differently from the BeerTender, and some beers may need adjustment in temperature or CO2 pressure to optimize their performance.

The BeerTender is best paired with smaller keg systems that are specifically designed for home use. Larger, industrial kegerators require more space and more complex setups, which the BeerTender B95 does not support.

Conclusion

The Krups BeerTender B95 is an excellent choice for those who want the experience of draft beer without the need for a full-sized kegerator. It’s compact, easy to use, and delivers a satisfying beer experience. By following the setup, maintenance, and troubleshooting guidelines in this guide, you can ensure that your BeerTender B95 continues to perform at its best, providing you with perfectly chilled, fresh beer every time.

The Krups BeerTender B95 is a convenient and stylish countertop tap that allows you to enjoy your favorite beer straight from the keg at home. In this guide, we will walk you through the process of setting up your BeerTender B95 in just 10 minutes. Whether you’re new to using beer dispensers or are a seasoned enthusiast, this step-by-step guide will ensure you get the best performance from your BeerTender B95.

Tools Required

• Krups BeerTender B95 unit
• Compatible keg (usually Heineken or similar)
• Fresh CO2 cartridge (if required by your keg)
• Clean towel or cloth for wiping surfaces
• Water (for initial cleaning)
• Power source (nearby electrical outlet)

Step-by-Step Guide to Setting Up Your Krups BeerTender B95

Unboxing and Preparing the Unit

Before starting, ensure that you have all parts of the Krups BeerTender B95, including the power cord and any accessories that came with it. Set the unit on a stable, flat surface close to an electrical outlet. Avoid placing it in direct sunlight or near heat sources to maintain beer temperature.

Step 1: Clean the BeerTender B95

It’s important to clean your BeerTender B95 before its first use. Even if it’s a brand-new unit, some residual factory dust or packaging materials may be present.

1. Dampen a clean cloth with water.
2. Wipe down the interior of the BeerTender B95 unit, including the tap area.
3. Dry all parts with a separate dry cloth to ensure there is no moisture left on the unit.

Step 2: Install the CO2 Cartridge (if required)

Some kegs may require a CO2 cartridge to maintain carbonation. If your keg needs one, locate the CO2 compartment at the back of the BeerTender B95.

1. Open the CO2 compartment on the rear of the unit.
2. Insert the CO2 cartridge, ensuring it fits securely.
3. Close the compartment. The cartridge will automatically be activated when you start pouring.

Step 3: Insert the Compatible Keg

The Krups BeerTender B95 is designed to work with certain keg sizes, usually Heineken kegs. Ensure your keg is compatible with the BeerTender B95.

1. Check that the keg is refrigerated to the recommended temperature (typically 4°C or 39°F).
2. Place the keg into the BeerTender B95, aligning the tap mechanism of the keg with the BeerTender’s dispensing spout.
3. Push the keg down gently to secure it in place. Make sure the keg is firmly seated and the tap is connected to the dispensing system.

Step 4: Power On the BeerTender B95

Now that the keg is securely in place, it’s time to power up the unit.

1. Plug the power cord of the BeerTender B95 into an electrical outlet.
2. Press the power button to turn on the unit. The LED display should light up, indicating the unit is operational.

Step 5: Adjust the Temperature Settings

The BeerTender B95 comes with a temperature control system that allows you to adjust the cooling level. Set the beer to the ideal drinking temperature.

1. Use the temperature adjustment buttons on the front of the unit to set the temperature. A typical setting for most beers is between 2°C (36°F) and 4°C (39°F).
2. The temperature will be displayed on the LED screen, and the BeerTender will begin cooling the keg.

Step 6: Test the Tap

Before pouring your first glass of beer, it’s good practice to check the functionality of the tap.

1. Place a glass under the tap.
2. Pull the tap handle to release beer. The first pour might have some foam, which is normal.
3. If there’s excess foam, adjust the pressure and temperature settings slightly to optimize the flow.

Step 7: Enjoy Your Beer!

Once you have adjusted the tap and temperature, you’re ready to enjoy your beer! Pour yourself a glass, and if necessary, fine-tune the tap flow to suit your preferences.

Troubleshooting Common Set-Up Issues

While setting up your BeerTender B95, you may encounter some issues. Here are some common problems and their solutions.

No Beer Dispenses

• Check the Keg Compatibility: Make sure the keg is compatible with the BeerTender B95.
• Ensure Proper Connection: Double-check that the keg tap is securely connected to the dispensing system.
• CO2 Pressure: If using a CO2 cartridge, ensure that it is correctly installed and activated.

Excessive Foam

• Temperature Too High: If the beer is too warm, it may pour with too much foam. Lower the temperature setting to around 4°C (39°F).
• Keg Too Full: If the keg is full, try to release a small amount of beer to reduce foam on subsequent pours.

Beer Too Warm

• Unit Isn’t Cooling Properly: Check the temperature settings on the BeerTender B95. Adjust the temperature to the appropriate level.
• Keg Not Cold Enough: Make sure the keg has been properly chilled before inserting it into the BeerTender.

Customization and Optimization for Better Performance

Adjusting the Beer Tender B95 Temperature

• Optimal Temperature Range: The Krups BeerTender B95 has a temperature control range between 2°C (36°F) and 12°C (54°F). For most beers, a temperature around 4°C (39°F) is ideal.
• Cooling Speed: The unit is equipped with a rapid cooling feature that can chill the keg quickly. Use this feature to bring your keg down to the ideal temperature in a short period of time.

Fine-Tuning the Flow Control

The flow control on the BeerTender B95 can be adjusted to reduce excessive foam during pouring. Experiment with different flow settings to find the one that gives you the perfect pour without too much foam. This is particularly important for stouts and ales, where a steady pour is essential for proper presentation.

Comparison with Similar Products

While the Krups BeerTender B95 is a high-quality and efficient beer dispenser, there are other similar products in the market. Here is a brief comparison:

Krups BeerTender B95 vs. BeerTender B100

• Design: The B100 offers a sleeker design with additional features such as a larger cooling capacity.
• Compatibility: The B95 supports a more limited selection of kegs, while the B100 offers broader compatibility with more keg sizes.
• Price: The B95 is typically more affordable compared to the B100, making it a good choice for casual beer drinkers.

Krups BeerTender B95 vs. PerfectDraft HD3720

• Cooling Efficiency: The PerfectDraft HD3720 has superior cooling capabilities but comes at a higher price point.
• Ease of Use: The BeerTender B95 is simpler to operate and maintain, making it ideal for those who prefer a straightforward setup.
• Size and Capacity: The PerfectDraft HD3720 has a larger keg capacity, which may be preferable for large gatherings.

Compatibility with Other Beer Products

The Krups BeerTender B95 is designed to work best with Heineken kegs, but it may also be compatible with other similar kegs depending on their size and tap system. When selecting a keg, ensure it matches the dimensions of the BeerTender B95 and that the tap system aligns correctly with the BeerTender’s dispensing mechanism.

The BeerTender B95 can also be paired with various beer glasses and accessories for a complete home brewery experience. However, it is important to note that the BeerTender’s cooling system may not be effective if the keg is too large or too small for the unit, so always check keg compatibility before purchasing.

Mini kegerators are an excellent solution for beer enthusiasts who want to enjoy fresh draft beer at home. Among the leading models in this category, the Krups BeerTender B95 and the PerfectDraft Pro stand out as two of the best options. This guide will break down the key differences, installation, maintenance, and performance optimization of each model to help you make an informed decision.

Overview of the Krups BeerTender B95

The Krups BeerTender B95 is a compact kegerator designed for home use. It is compatible with 5-liter kegs, making it a great choice for those who want to enjoy a variety of craft beers without taking up much space. This system is popular for its user-friendly design, efficient cooling system, and ability to keep beer fresh for up to 30 days.

Overview of the PerfectDraft Pro

The PerfectDraft Pro is another premium mini kegerator that allows beer lovers to pour a cold, draft-style beer from home. Unlike the BeerTender B95, the PerfectDraft Pro is compatible with a larger selection of 6-liter kegs, giving users more options when it comes to brand choices and beer types. The PerfectDraft Pro also boasts an advanced digital temperature control system that helps maintain precise and consistent cooling.

Installation of the Krups BeerTender B95

Step-by-Step Installation

1. Unboxing: Remove all components from the box and inspect them for any visible damage.
2. Setting Up the Keg: Place the 5-liter keg in the BeerTender B95 unit. Ensure it is seated properly on the keg holder and aligned with the tap system.
3. Connecting the CO2: Attach the CO2 cartridge to the compartment in the BeerTender. Tighten securely to ensure no leaks.
4. Powering On: Plug the unit into a power outlet and switch it on.
5. Cooling: Allow the unit to chill the beer for at least 12 hours before use. The BeerTender B95 will cool to the optimal temperature for most beers, around 37°F (3°C).

Installation of the PerfectDraft Pro

Step-by-Step Installation

1. Unboxing: Carefully unbox the PerfectDraft Pro and check all parts for any damages.
2. Keg Insertion: Insert a 6-liter keg into the unit. The kegs should lock into place, ensuring they are aligned with the dispenser.
3. CO2 Connection: Insert the CO2 cartridge and ensure it’s securely connected to the CO2 compartment.
4. Power On: Plug in the system, switch it on, and let it cool down. It will take a few hours to reach the ideal temperature.
5. Temperature Settings: Use the digital controls to set the desired temperature, typically between 39°F and 45°F (4°C – 7°C) depending on the beer type.

Troubleshooting Common Setup Issues

Krups BeerTender B95 Troubleshooting

• CO2 Leaks: If you notice excessive foam or difficulty dispensing beer, the CO2 cartridge may not be securely attached. Double-check the cartridge connection and ensure it is tight.
• Insufficient Cooling: If the beer isn’t cold enough, ensure the unit is in a cool, ventilated area and has had enough time to cool the keg. The BeerTender B95 may struggle in high-temperature environments.
• Poor Pouring Pressure: Ensure that the tap is not clogged and the keg is properly aligned with the dispensing system.

PerfectDraft Pro Troubleshooting

• Temperature Issues: If the beer is too warm or too cold, check the digital settings and adjust them according to your preference. Ensure that the cooling unit is not obstructed.
• Foamy Beer: If foam is excessive, inspect the CO2 cartridge for leaks. It may also help to check if the keg has been inserted properly.
• Error Messages: In case of error codes on the display, consult the manual for troubleshooting steps, such as resetting the system or checking for hardware issues.

Customization and Optimization for Better Performance

Optimizing the Krups BeerTender B95

• Ideal Temperature Settings: While the BeerTender B95 automatically adjusts its cooling, you can optimize the temperature by setting it at 37°F (3°C) for most lager and pilsner beers.
• CO2 Adjustment: Fine-tune the CO2 cartridge to avoid excess foam. If pouring is too slow or fast, adjust the pressure by securing or loosening the CO2 connection.
• Keg Rotation: For the freshest beer, rotate kegs regularly to avoid stale beer after the 30-day mark.

Optimizing the PerfectDraft Pro

• Precise Temperature Control: Use the digital control system to fine-tune the temperature. PerfectDraft Pro offers a wider range of temperature settings, so experimenting with different settings can improve beer quality.
• Pressure Regulation: PerfectDraft Pro has a built-in pressure control, which can help reduce foam. Ensure that the CO2 pressure is within the optimal range, especially for darker beers or higher-carbonation brews.
• Keg Swapping: The 6-liter keg size allows for more options, so experimenting with different beers will optimize your experience.

Comparison of Krups BeerTender B95 vs. PerfectDraft Pro

Feature	Krups BeerTender B95	PerfectDraft Pro
Keg Size	5-liter	6-liter
Temperature Control	Manual (approx. 37°F/3°C)	Digital control (39°F – 45°F/4°C – 7°C)
Compatibility	Compatible with limited brands	Works with a larger selection of brands
Cooling Time	12 hours to reach optimal temperature	3-4 hours to cool
CO2 Cartridge	Included, compact	Included, larger capacity
User Interface	Simple, mechanical	Advanced, digital controls
Price	Lower range	Higher range

The Krups BeerTender B95 is best for individuals seeking a simple, space-efficient solution for enjoying smaller kegs, while the PerfectDraft Pro provides more advanced features, better compatibility with various brands, and a more customizable cooling system.

Understanding Compatibility with Other Related Beer Products

Krups BeerTender B95 Compatibility

• Keg Compatibility: Works exclusively with 5-liter kegs, which are typically available in select beer brands like Heineken, Birra Moretti, and Paulaner.
• CO2 Cartridge: The BeerTender B95 uses a small CO2 cartridge, which limits how long it can keep the beer carbonated. Regular cartridge replacement is necessary for optimal performance.

PerfectDraft Pro Compatibility

• Keg Compatibility: Compatible with a wider range of 6-liter kegs, which includes popular brands like Budweiser, Stella Artois, and Leffe. This system provides more flexibility for those who enjoy different styles of beer.
• CO2 Cartridge: The PerfectDraft Pro uses a larger CO2 cartridge, extending the lifespan of each cartridge and making it a more cost-effective option in the long run.

Conclusion

Choosing between the Krups BeerTender B95 and the PerfectDraft Pro ultimately comes down to your preferences regarding keg size, customization options, and brand compatibility. The BeerTender B95 is a more budget-friendly and compact option, perfect for individuals who don’t mind being limited to a smaller selection of kegs. On the other hand, the PerfectDraft Pro offers more flexibility, precise temperature control, and a broader range of compatible beer brands, making it ideal for those who want a premium home draft experience.

Whichever option you choose, both models provide an excellent way to enjoy fresh draft beer at home with minimal hassle and maximum enjoyment.

When it comes to home beer dispensing systems, the Krups BeerTender B95 stands out for its ability to keep your beer fresh and perfectly chilled for a premium pour every time. However, finding the best price on this high-quality beer dispenser requires some research. This guide will walk you through the process of purchasing the Krups BeerTender B95 at the lowest price possible, offering insights into where to look for discounts, the factors influencing the price, and tips for making a smart purchase.

Overview of the Krups BeerTender B95

The Krups BeerTender B95 is a compact and easy-to-use beer dispenser designed for home use, specifically for use with Heineken DraughtKegs. It ensures your beer stays fresh for up to 30 days, with a temperature control system that maintains the perfect drinking temperature. The system is built to deliver a smooth, frothy pour, just like you’d get at a bar. This makes it a popular choice among craft beer enthusiasts and casual beer drinkers alike.

Features of the Krups BeerTender B95

The Krups BeerTender B95 boasts several features that enhance the home beer experience:

• Temperature Control: The BeerTender B95 can keep your beer chilled between 37.4°F and 53.6°F, ensuring the perfect temperature.
• Freshness: The BeerTender B95 is designed to keep beer fresh for up to 30 days once the keg is tapped.
• Easy Operation: Its simple, one-touch operation allows you to tap the keg and pour with ease, making it a great option for any skill level.
• Design: The compact and sleek design ensures it fits into most kitchen setups without taking up too much space.

2025 Price Trends for the Krups BeerTender B95

In 2025, the price of the Krups BeerTender B95 has seen fluctuations due to market demand, retailer promotions, and the introduction of newer models. Typically, this beer dispenser ranges between $100 and $200, with discounts often available during seasonal sales, Black Friday, or on specialized e-commerce platforms.

Factors Influencing the Price

• Seasonal Demand: Prices tend to rise during the summer months when demand for cold beer is higher. Conversely, you might find a better price during the off-season or in colder months.
• Retailer Promotions: Keep an eye on retailers who offer periodic discounts or bundles that include extra accessories, such as additional kegs or cleaning tools.
• Online vs. In-store Prices: Online platforms may offer better deals, but shipping costs or local taxes could affect the final price.
• Condition of the Product: New models will generally be priced higher than refurbished or pre-owned units.

Where to Buy the Krups BeerTender B95 Cheap in 2025

Here are some of the best places to buy the Krups BeerTender B95 at competitive prices:

1. Amazon

Amazon is often one of the top choices for competitive pricing. The platform frequently offers sales and promotions, especially during major shopping events like Prime Day, Black Friday, and Cyber Monday. Check for discounts on both new and used units. Amazon also features user reviews that can provide insight into the product’s performance and reliability.

2. eBay

eBay can be a great option if you’re looking for a lower price on a used or refurbished Krups BeerTender B95. Many sellers offer gently used units, sometimes bundled with additional accessories, at lower prices than what you’d find in-store. Be sure to check seller ratings and product condition before making a purchase.

3. Best Buy

Best Buy regularly offers promotions on home appliances, including beer dispensers. You can often find the BeerTender B95 on sale, especially if you’re part of their loyalty program or if you’re shopping during holiday discounts. Additionally, Best Buy may offer price matching if you find a lower price elsewhere.

4. Walmart

Walmart is another reliable option for purchasing the Krups BeerTender B95, often at competitive prices. While not as frequently discounted as on Amazon or eBay, Walmart offers both online and in-store purchasing options, which allows for easy returns and in-person customer service.

5. Target

Target’s periodic sales can also provide significant savings on the Krups BeerTender B95. Target’s RedCard members often enjoy extra discounts, so it might be worth considering if you’re planning to make other home appliance purchases.

6. Specialized Online Stores

Certain niche retailers that specialize in beer equipment or home brewing accessories may offer the BeerTender B95 at a lower price or with additional perks, like free shipping or extended warranties. These retailers sometimes bundle the BeerTender B95 with other items that enhance your beer dispensing experience, like additional kegs or cleaning supplies.

7. Directly from Krups

Occasionally, Krups themselves will run special promotions or direct sales for the BeerTender B95. Signing up for Krups’ newsletter or checking their official website during holiday seasons might result in discounts or exclusive offers that you can’t find elsewhere.

Tips for Buying the Krups BeerTender B95 on Sale

To maximize your savings when buying the Krups BeerTender B95, follow these tips:

• Monitor Prices Regularly: Prices for products like the BeerTender B95 can change quickly, so monitoring the product regularly on multiple platforms will help you spot a sale or discount as soon as it happens.
• Sign up for Alerts: Many online retailers offer price alerts for specific products. Setting these up can help you stay informed about price drops.
• Consider Refurbished Units: Refurbished models are typically cheaper but still come with warranties. They can be a good choice if you want to save money without sacrificing quality.
• Look for Bundles: Some retailers offer bundle deals that include the BeerTender B95 along with additional kegs or cleaning equipment. These bundles can sometimes be more cost-effective than buying individual items separately.
• Check Return Policies: Make sure you understand the return policy, especially if you’re buying from a third-party seller. A clear return policy will give you peace of mind in case the unit is faulty or doesn’t meet your expectations.

Comparison with Other Beer Dispensers

While the Krups BeerTender B95 is a popular choice, there are other options on the market that you might want to consider, depending on your needs and budget:

1. Heineken DraughtKeg Dispenser

The Heineken DraughtKeg dispenser is similar to the Krups BeerTender B95 but is designed specifically for Heineken kegs. It offers a very similar experience, with temperature control and freshness features. The main difference lies in its slightly higher price point and focus on Heineken kegs exclusively.

2. Kegco Kegerator

For those who want a more extensive home beer dispensing system, the Kegco Kegerator offers a larger setup that can accommodate multiple keg sizes. It’s more suitable for those who entertain frequently or for homebrewers, but it’s significantly larger and more expensive than the compact Krups BeerTender B95.

3. EdgeStar Full Kegerator

The EdgeStar Full Kegerator is another alternative for serious beer lovers who need a more versatile system for homebrewed or commercial kegs. It has a larger capacity and more advanced features, but its higher price makes it a less practical choice for casual beer drinkers.

Understanding Compatibility with Related Beer Products

The Krups BeerTender B95 is designed to work exclusively with Heineken DraughtKegs. If you are interested in using it with other types of kegs, you may face compatibility issues, and the performance may not be as optimal. The system’s design is tailored to the size and pressure specifications of Heineken kegs, which means that other kegs might not fit properly or may not dispense as effectively.

For anyone using multiple types of kegs or interested in a more versatile beer dispensing system, other options like the Kegco Kegerator may be a better fit. Always check the compatibility of the product with the keg type before purchasing.

Conclusion

The Krups BeerTender B95 offers an excellent beer dispensing experience with its easy-to-use operation and ability to maintain beer freshness for up to 30 days. To secure the best deal, consider shopping across different platforms like Amazon, eBay, and Best Buy, while monitoring for sales or promotions. By following the tips provided in this guide, you can ensure you’re making a smart, cost-effective purchase of the Krups BeerTender B95.

The Krups BeerTender B95 is a high-quality beer dispensing system that promises to deliver fresh, chilled beer with every pour. However, like any piece of equipment, it may experience issues, including unwanted foam in your glass. Foamy pours can be frustrating, especially when you want to enjoy a smooth and refreshing beer. This guide will walk you through troubleshooting the most common causes of foamy pours with the Krups BeerTender B95, along with tips for ensuring optimal performance.

Understanding the Causes of Foamy Pours

Before diving into troubleshooting steps, it’s important to understand why foamy pours occur. Foamy beer is often caused by a combination of factors, including temperature, pressure, and the state of your BeerTender system. Foamy pours typically result from either too much pressure, improper temperature control, or issues with the tap. Identifying the root cause of the foam will allow you to address the issue effectively.

Tools Required

• Clean cloth or paper towel
• A soft brush
• Replacement CO2 cartridges (if applicable)
• Thermometer
• Level tool

Common Causes of Foamy Pours and How to Fix Them

1. Incorrect Temperature Settings

One of the leading causes of foamy pours in the Krups BeerTender B95 is improper temperature. Beer that is too warm or too cold can cause excessive foam. When the beer is too warm, the CO2 gas in the beer escapes too quickly, resulting in a frothy pour.

How to Fix It:

• Check the temperature: Ensure the beer is being kept at the correct temperature of around 40°F (4°C). You can use a thermometer to measure the beer’s temperature if the BeerTender’s built-in display doesn’t provide a precise reading.
• Adjust the temperature: If the beer is too warm, adjust the BeerTender’s cooling setting to a lower temperature.
• Allow time to chill: If you’ve just inserted a new keg, allow it to chill for at least 6-8 hours before dispensing to ensure it reaches the ideal temperature.

2. Incorrect CO2 Pressure

The BeerTender B95 relies on CO2 cartridges to pressurize the beer and push it through the tap. If the CO2 pressure is too high or too low, it can lead to foamy pours. High CO2 pressure forces too much gas into the beer, creating excessive foam, while low pressure prevents proper beer flow, causing sluggish pours and foam buildup at the tap.

How to Fix It:

• Check CO2 pressure: Ensure the CO2 pressure is set at the recommended level for your specific keg. Typically, the ideal pressure for the Krups BeerTender B95 is between 1.0 and 1.5 bars. Refer to the user manual for the exact pressure specifications.
• Replace the CO2 cartridge: If the CO2 level is low, replace the CO2 cartridge. Ensure the cartridge is properly installed and sealed to avoid leaks.
• Adjust pressure regulator: If your BeerTender B95 has a pressure regulator, adjust it to the appropriate setting based on your beer’s needs.

3. Dirty Tap or Dispenser

Over time, beer taps and dispensers can accumulate residue and bacteria, leading to clogged lines and improper flow. Dirty taps often result in excess foam as the beer struggles to flow through the contaminated system.

How to Fix It:

• Clean the tap: Regularly clean the tap with warm water and mild detergent. Use a soft brush to scrub any residues from the faucet and surrounding areas.
• Clean the dispensing lines: If your BeerTender B95 allows you to remove the dispensing lines, clean them thoroughly. Run warm water through the lines to remove any beer buildup. You may need to use a beer line cleaning solution for deeper cleans.
• Use a damp cloth: Wipe down the dispenser and surrounding areas to ensure there is no dirt or debris.

4. Improper Keg Installation

A poorly installed keg can lead to foamy pours. If the keg is not seated properly in the BeerTender B95 or the tap is not aligned correctly, the beer may not flow smoothly, creating an overabundance of foam.

How to Fix It:

• Ensure proper installation: Make sure the keg is seated securely in the BeerTender B95 and the tap is connected properly.
• Align the tap correctly: If the tap appears misaligned, adjust it until it is properly positioned. Ensure the tap is firmly attached to the keg’s nozzle and that the flow control is set appropriately.

5. Beer Not Properly Carbonated

If the beer inside the keg is under-carbonated or has lost its carbonation, it may result in excessive foam when poured. This issue can occur if the beer has been stored improperly or if the keg has been exposed to fluctuating temperatures.

How to Fix It:

• Check beer freshness: Ensure that the beer is fresh and hasn’t been stored for too long. Beer that has been sitting around for an extended period may lose carbonation.
• Allow beer to carbonate: If you have recently installed a new keg, allow it to carbonate by keeping the BeerTender B95 on for a few hours before pouring. If the carbonation level is too low, you may need to replace the keg.

6. Overfilled Keg

An overfilled keg can also lead to foamy pours, as there may not be enough space for the beer to settle and flow properly. This is typically a result of improperly inserted kegs or excess beer left in the keg.

How to Fix It:

• Check keg fill levels: Ensure the keg is not overfilled. Follow the manufacturer’s guidelines for the appropriate keg fill level.
• Remove excess beer: If you suspect there is too much beer in the keg, remove the excess to ensure proper dispensing.

7. Faulty Tap Assembly

In some cases, a faulty tap assembly or a defective part within the BeerTender B95 system could cause foamy pours. A damaged tap valve or other components could result in an improper seal or incorrect flow.

How to Fix It:

• Inspect the tap assembly: Carefully inspect the tap assembly for any visible damage. Check for cracks, leaks, or signs of wear.
• Replace faulty parts: If you notice any damage, consider replacing the faulty parts. You may need to refer to the BeerTender’s user manual or contact the manufacturer for replacement parts.

Additional Tips for Better Beer Dispensing

To optimize the performance of your Krups BeerTender B95 and ensure consistently smooth pours, follow these additional maintenance and usage tips:

• Regularly clean the BeerTender: Cleaning your BeerTender system after each use will prevent beer buildup and ensure proper operation.
• Store beer kegs properly: Store your kegs in a cool, dry place to prevent temperature fluctuations and maintain the proper carbonation levels.
• Avoid overpressurizing: Always use the recommended CO2 pressure settings to avoid foamy pours caused by over-pressurization.

Conclusion

Foamy pours from the Krups BeerTender B95 can be caused by a variety of factors, including improper temperature, incorrect CO2 pressure, dirty taps, or poorly installed kegs. By following the troubleshooting steps outlined in this guide, you can resolve these issues and optimize the performance of your BeerTender system. Regular maintenance and careful attention to setup and operation will help you achieve the perfect pour every time, ensuring a smooth and enjoyable beer-drinking experience.

The Krups BeerTender B90 is a versatile beer dispenser designed to provide the ultimate beer experience, whether you’re at home or on the go. Compact and efficient, this appliance is perfect for parties, gatherings, or even a solo beer night. In this guide, we’ll walk through the installation, adjustment, and maintenance of the Krups BeerTender B90, troubleshooting common setup issues, customizing for better performance, and comparing it to similar products. We’ll also explore its compatibility with other beer-related products, ensuring you get the most out of your BeerTender B90 wherever you are.

Tools Required

• Krups BeerTender B90
• Compatible Heineken DraughtKegs
• Power source (wall outlet)
• Cleaning supplies (mild detergent, soft cloth, warm water)
• Screwdriver (for adjustments)
• Replacement parts (if necessary)

Installation of the Krups BeerTender B90

Installing the Krups BeerTender B90 is straightforward, and with a few simple steps, you’ll be ready to serve draft beer in no time.

1. Unbox the BeerTender B90: Remove the BeerTender B90 from its packaging and check that all parts are included. Ensure that there is no visible damage to the unit.
2. Place the BeerTender on a Stable Surface: Choose a stable, flat surface to set up the BeerTender. Ensure the surface can support the unit and allow for airflow.
3. Insert the Heineken DraughtKeg: The BeerTender B90 is designed to work with Heineken DraughtKegs. To install the keg, align the valve on the keg with the BeerTender’s dispenser and securely connect it.
4. Power On: Plug the BeerTender into a nearby electrical outlet. The device should power up immediately, indicated by the LED display.
5. Cool the Beer: Once the BeerTender is powered on, it will automatically start cooling the beer. The cooling time may vary depending on the initial temperature of the beer, but it typically takes about 10-15 minutes for the beer to reach the optimal serving temperature of 37.4°F (3°C).
6. Test the Dispensing Mechanism: Press the dispensing handle to ensure the flow of beer. The BeerTender B90 should deliver a smooth pour with minimal foam.

Adjustment for Optimal Performance

Once your BeerTender B90 is set up, adjustments may be necessary to ensure it operates efficiently.

1. Adjust the Temperature: Although the BeerTender automatically cools the beer to the optimal temperature, you can fine-tune the temperature by pressing the “Temp” button. However, note that it is best to avoid any significant temperature fluctuations, as it can impact the flavor of the beer.
2. Control Beer Flow: The BeerTender B90 allows for easy flow adjustment. If the pour is too slow or too fast, the dispensing system can be adjusted via the control panel to ensure a steady stream with minimal foam.
3. Check for Proper Sealing: Ensure that the DraughtKeg is properly sealed. If there’s a loss of pressure, beer will not dispense correctly. This can be easily addressed by checking the connection between the BeerTender and the DraughtKeg, ensuring it is secure.
4. Check for Airlocks: If the beer flow is inconsistent, it might be due to airlocks in the system. Simply disconnect the keg, give it a gentle shake to release air, and reconnect it for smooth dispensing.

Maintenance and Cleaning

Regular maintenance and cleaning of your BeerTender B90 are crucial to keeping it in top condition. Over time, dust, dirt, and beer residue can build up inside the dispenser, affecting the performance.

1. Turn Off and Unplug: Always unplug the BeerTender before starting the cleaning process.
2. Remove the DraughtKeg: Carefully disconnect the DraughtKeg from the BeerTender to prevent any beer from spilling out during the cleaning.
3. Clean the Dispensing System: Use a mild detergent mixed with warm water to clean the dispensing nozzle. Avoid abrasive materials that could scratch the surface. Wipe the dispenser with a soft cloth to remove any residue.
4. Wash the Internal Components: Clean the drip tray and beer tray using warm, soapy water. The drip tray can be removed and washed separately. Be sure to dry all parts thoroughly before reassembling.
5. Clean the Cooling System: The BeerTender B90 features an integrated cooling system, which can accumulate dust or debris over time. Use a soft brush or vacuum cleaner to gently clean the vents and internal cooling areas.
6. Reassemble and Test: Once everything is cleaned and dried, reconnect the DraughtKeg and power up the BeerTender to ensure proper function.

Troubleshooting Common Issues

Even with its user-friendly design, the BeerTender B90 may encounter minor issues. Here are some common troubleshooting steps:

1. No Beer Dispensed:
   • Cause: Ensure the DraughtKeg is properly installed and the valve is connected correctly.
   • Solution: Recheck the keg connection and ensure the BeerTender is turned on and cooled to the correct temperature.
2. Beer Flow Is Too Slow or Fast:
   • Cause: Airlocks or pressure loss in the system can cause uneven flow.
   • Solution: Disconnect the keg, shake it gently to release trapped air, and reconnect it. Adjust the flow settings using the BeerTender’s control panel.
3. Beer Is Too Warm:
   • Cause: The cooling system may not be functioning properly.
   • Solution: Check the BeerTender’s cooling system and ensure it is clean. Verify that the unit is not placed in a location that is too warm for optimal performance.
4. Excessive Foam:
   • Cause: Improper beer pressure or incorrect dispensing adjustments.
   • Solution: Adjust the flow control settings to regulate the beer’s flow. Ensure that the DraughtKeg is properly sealed and the BeerTender is operating at the right temperature.

Customization and Optimization

While the BeerTender B90 is designed to deliver optimal performance out of the box, there are a few ways you can customize the setup for even better results:

1. Beer Selection: The BeerTender is compatible with Heineken DraughtKegs, but if you prefer a different beer, check for compatible kegs that may be available. Always ensure the keg is the correct size and fits securely in the BeerTender.
2. Temperature Control: If you’re hosting a party or large event, you might want to tweak the cooling settings to maintain a consistent, colder temperature for longer periods. Using the BeerTender in a cooler room or keeping the beer refrigerated before installation can help.
3. Accessory Upgrades: Consider purchasing accessories like a larger drip tray or a more durable dispensing hose if you’re planning frequent use. These can be found through Krups or third-party suppliers.

Comparison with Similar Products

When comparing the Krups BeerTender B90 to similar beer dispensers, it stands out in a few areas:

• Compact Design: The B90 is more compact than many competitors, making it ideal for smaller spaces or portability.
• Cooler Performance: While some dispensers may not have advanced cooling systems, the BeerTender B90 keeps beer chilled to the optimal serving temperature without needing a dedicated fridge.
• Compatibility: The BeerTender B90 is specifically designed to work with Heineken DraughtKegs, which offers a seamless beer experience. Other beer dispensers may support a variety of kegs but often require adapters or custom fittings.

Compatibility with Other Beer Products

The Krups BeerTender B90 is optimized for use with Heineken DraughtKegs. While it does not support all beer kegs, you can find alternative kegs from other brands that are compatible with the BeerTender’s system, as long as they fit within the unit’s dimensions.

If you plan to use your BeerTender B90 in combination with other beer products like kegerators or beer faucets, be mindful of the compatibility between keg sizes and tap systems. For the best results, stick with the DraughtKeg series that Krups has specifically designed for use with this model.

By understanding these compatibility considerations, you can ensure a smooth beer-serving experience every time.