Product Overview

The Krups BeerTender B95 is a highly sought-after beer dispensing system that combines convenience, quality, and precise performance. It is designed to bring the pub experience into your home, delivering chilled draft beer from your kegs at the perfect temperature. For enthusiasts and homebrewers, understanding the dimensions and capacity of the BeerTender B95 is essential to ensuring proper installation, usage, and optimal performance.

Dimensions of the Krups BeerTender B95

Understanding the dimensions of the Krups BeerTender B95 is crucial for determining whether it fits in your desired space. The unit is compact and sleek, allowing it to fit in most kitchen areas or home bars without taking up too much room.

• Height: 11.7 inches (29.7 cm)
• Width: 14.6 inches (37.1 cm)
• Depth: 17.3 inches (44 cm)
• Weight: 9.3 pounds (4.2 kg)

The BeerTender B95’s design is user-friendly, with ergonomic features and a space-efficient build. It is small enough to sit comfortably on your countertop but large enough to accommodate the required beer kegs.

Capacity and Beer Storage

The Krups BeerTender B95 is compatible with a variety of beer kegs, specifically those that are compatible with the BeerTender system, which generally includes 5-liter kegs. The system is designed to maintain the beer at a consistent temperature, ensuring freshness and perfect pours every time.

• Keg Size: 5 liters (1.32 gallons)
• Capacity: 5 liters of beer
• Beer Pouring Time: Up to 20-25 servings per keg (approximately 1 pint per serving)

The BeerTender B95 is an ideal choice for smaller gatherings or casual home use, where you don’t need a large volume of beer at once. With the 5-liter keg, you can serve multiple guests or enjoy several rounds without needing to replace the keg immediately.

Installation and Set-Up

Setting up the Krups BeerTender B95 is straightforward, but it is essential to follow the proper steps to ensure everything works correctly. The BeerTender B95 is easy to install and requires minimal assembly.

Tools Required:

• Phillips screwdriver
• Flathead screwdriver
• Clean towel or cloth

Installation Steps:

1. Unbox the BeerTender B95: Carefully remove the unit from its packaging, ensuring all components are present.
2. Position the BeerTender: Place the BeerTender on a stable, level surface such as a kitchen countertop or home bar.
3. Attach the Beer Keg Holder: Use the Phillips screwdriver to attach the keg holder to the BeerTender base, securing it firmly in place.
4. Install the Beer Keg: Open the BeerTender lid and place the compatible 5-liter keg inside. Ensure the keg is aligned correctly and fits snugly.
5. Connect the Beer Tap: Attach the beer tap to the keg. Ensure it is securely connected to prevent leaks.
6. Plug in the Unit: Connect the BeerTender to a power outlet and press the power button to turn it on.
7. Set the Temperature: Adjust the temperature to your preferred setting, typically between 37°F (3°C) and 39°F (4°C) for optimal beer freshness.
8. Start Pouring: Once the keg is properly installed, the BeerTender will begin cooling the beer. After a short wait, you’re ready to pour your first glass.

Maintenance and Cleaning

Maintaining the Krups BeerTender B95 is essential for preserving the quality of your beer and extending the lifespan of the unit. Regular cleaning and maintenance are required to prevent bacterial buildup, mold, and other contaminants.

Cleaning Steps:

1. Turn off the BeerTender: Always unplug the unit before cleaning to avoid electrical accidents.
2. Remove the Keg: Take the beer keg out of the unit, ensuring there is no excess beer spilling.
3. Clean the Tap: Use warm water and mild soap to clean the beer tap. Avoid using abrasive materials that could damage the tap.
4. Wipe the Surface: Use a clean, damp cloth to wipe down the BeerTender’s exterior. This will prevent dust and grime from accumulating.
5. Empty the Beer Line: Detach the beer line from the keg and run warm water through it to flush out any residual beer.
6. Dry Components: Allow all components to dry thoroughly before reassembling the BeerTender.
7. Reinstall the Keg: Once everything is dry, reinstall the keg and beer line, ensuring the tap is clean and functioning.

By performing these cleaning steps after every use, you can ensure your BeerTender remains in excellent condition, providing you with cold, fresh beer every time.

Troubleshooting Common Issues

While the Krups BeerTender B95 is designed for reliability, you may encounter some common issues during its use. Here are the steps to troubleshoot and resolve these problems:

1. Beer Not Pouring Properly

• Possible Cause: The beer tap or beer line may be clogged.
• Solution: Clean the beer line and tap thoroughly using warm water to flush out any blockages.

2. Beer Is Too Warm

• Possible Cause: The temperature setting may be too high or the cooling system may be malfunctioning.
• Solution: Lower the temperature setting to the recommended range (37°F to 39°F) and check the power supply to ensure the cooling system is functioning correctly.

3. Beer Foam Issues

• Possible Cause: The beer pressure may be too high, or the keg may not be properly seated.
• Solution: Re-seat the keg and ensure it is aligned properly. Check the beer pressure and adjust it if necessary.

4. Beer Keg Leaking

• Possible Cause: The keg is not properly connected to the beer tap.
• Solution: Disconnect and reconnect the keg and beer tap, ensuring a secure fit to prevent leaks.

Customization and Optimization

The Krups BeerTender B95 allows for a few customization options to optimize your beer experience. While the unit is designed for simple operation, small adjustments can improve its performance.

Temperature Control:

Adjust the temperature settings to suit your preference. The BeerTender B95 typically keeps the beer between 37°F (3°C) and 39°F (4°C), but you can experiment with slightly higher or lower settings based on your beer style.

Beer Keg Selection:

For optimal results, use kegs that are designed for the BeerTender B95 system. Although the unit works best with 5-liter kegs, you may also explore various craft beer options to customize your beer experience.

Comparison with Similar Products

When comparing the Krups BeerTender B95 to similar products, it’s important to look at key factors such as size, capacity, and ease of use. Here’s how it stands against its competitors:

Krups BeerTender B95 vs. PerfectDraft by Philips

• Beer Keg Size: The BeerTender B95 is compatible with 5-liter kegs, while PerfectDraft by Philips uses 6-liter kegs.
• Cooling System: Both systems offer similar cooling capabilities, keeping beer at a consistent temperature for freshness. However, the BeerTender B95’s slightly smaller design may appeal to those with limited space.
• Ease of Use: Both models are easy to set up and maintain, with clear instructions and simple controls.

Krups BeerTender B95 vs. SUB by Heineken

• Beer Keg Compatibility: The SUB by Heineken uses specially designed kegs, which limits the variety of beers you can enjoy. In contrast, the BeerTender B95 allows for more flexibility in keg selection.
• Build Quality: Both units are durable and made with high-quality materials, but the BeerTender B95 is more compact and portable.

Compatibility with Related Products

The Krups BeerTender B95 works seamlessly with other beer-related products, especially beer dispensers and kegerators. It is compatible with most 5-liter kegs, but it’s important to verify that your keg fits the system before purchase.

• Keg Systems: The BeerTender B95 is designed to work with kegs that feature a tap system compatible with the unit. Always check the keg’s compatibility before purchasing.
• Beer Dispensers: The B95 can be connected to beer dispensers for an integrated experience, allowing for greater ease in pouring and temperature control.

By understanding the dimensions, capacity, installation process, and troubleshooting tips for the Krups BeerTender B95, you can ensure an optimal beer dispensing experience every time.